Inside the DZ-BM-7236: Slim Mirror Construction and 4 cm Packaging

 

For bathroom mirror buyers, product specifications extend beyond the illuminated surface. Glass thickness, overall construction and finished packaging dimensions each tell a different part of the story.

The DZOPTO DZ-BM-7236 combines a 72 × 36 inch LED bathroom mirror with a 25 mm overall product thickness and a finished package measuring 40 mm thick. Understanding these measurements helps buyers review the product more clearly and prepare the information needed for installation, storage and shipment planning.

Three Measurements That Should Not Be Confused

The featured DZ-BM-7236 has three distinct thickness specifications:

• 4 mm glass thickness: The thickness of the tempered mirror glass.

• 25 mm product thickness: The overall thickness of the mirror assembly.

• 40 mm packed thickness: The total thickness of the finished package, including the top and bottom cardboard layers.

These figures are not interchangeable. Glass thickness describes the mirror material, product thickness describes the complete assembly, and packed thickness describes the unit prepared for shipment.

Keeping them separate makes technical discussions and purchasing documents easier to follow.

A Closer Look at the Mirror Construction

The DZ-BM-7236 uses 4 mm tempered mirror glass with a white PVC frame. The overall product thickness is 25 mm.

The back does not have a full covering panel. The rear construction includes the defogging component and a housing for the power and touch-control components.

When reviewing the mirror for a project, buyers should consider the rear construction together with the mounting arrangement. Overall product thickness alone does not describe every installation clearance, so the supplied installation instructions should also be reviewed.

What the 4 cm Packaging Specification Includes

The featured model is packed with foam protection and a carton, with an instruction manual included.

Its 40 mm total packed thickness includes both the upper and lower cardboard layers. It is the finished package measurement, rather than an internal carton dimension.

This distinction matters when comparing a packaging drawing with a completed carton. A dimension shown on a drawing should be checked to establish whether it describes an internal space, a panel or the finished external package.

For this configuration, the confirmed finished thickness is 4 cm.

Put Packaging Dimensions into Your Purchasing Records

A useful purchasing record separates product information from shipping information.

For the product, record the model, mirror dimensions, overall thickness and required configuration. For shipping, request the finished external carton dimensions, gross weight and quantity.

The 40 mm packaging thickness provides one part of that information. It does not, by itself, establish freight cost, pallet capacity or container loading quantity. Those calculations also depend on the package length and width, weight, packing arrangement and handling requirements.

For an order containing several mirror sizes, packaging details should be confirmed for each selected model.

Lighting and Controls Within the Featured Configuration

Alongside its slim construction, the DZ-BM-7236 offers:

• Three selectable color temperatures: 3000K, 4500K and 6500K

• Stepless brightness adjustment

• Rear backlighting

• Defogging that switches on and off with the mirror light

• Radar-controlled lighting with an approximate detection range of 1.5–2 metres

The radar configuration uses a 30-second turn-on delay after a person is detected and a 30-second turn-off delay after the person leaves.

The confirmed electrical configuration is 200–240 V with an EU plug. The switch model is LTZN-03D-LD, and the LED strip model is LT12-EHY-ANW120-K8-2765.

These specifications apply to the featured configuration. Power consumption and the corresponding specifications for other sizes should be confirmed separately.

One Model Within a 20-Size Collection

The DZ-BM-7236 is part of the DZOPTO DZ-BM series, which offers 20 mirror sizes.

This article focuses on the construction and packaging of the featured 72 × 36 inch model. Buyers considering other models should use the series size list to shortlist suitable dimensions, then confirm the relevant product and packaging details.

This approach keeps the enquiry specific and avoids applying one model’s measurements to an entire collection.

Request Product and Packaging Details

To discuss a quotation, send our team your preferred model, quantity and destination market. Please also specify any voltage, plug, lighting or packaging requirements.

We can then confirm the selected configuration and the information needed for your purchasing review.

Explore the DZ-BM series on our website or contact DZOPTO directly.

Website: https://www.ledmirrorvip.com
Email: info@ledmirror.vip